Persephone's Basket logoPersephone's BasketStart a pilot

Hardware

On the wire or on a pole

Hangs on the trellis wire or mounts on a pole. No contractor, no wiring, reporting the same day.

Sensor node with a sealed enclosure, leaf wetness blade, LoRa antenna, and stainless steel canopy sensor

Leaf wetness sensor

A flat sensing blade that sits among the leaves and tells you when the canopy is wet and for how long. Hours of leaf wetness help you judge mildew and rot pressure alongside what you see in the rows.

Tells you
If leaves are wet, and for how long
Placement
In the canopy
Helps you assess
Disease pressure and spray timing

What a node reports · Sample readings

Leaf wetness

Wet for 3 h 20 min

Canopy

64°F, 86% humidity

Battery

96%, charging

Radio

Sent to the gateway

Inside the box

Inside that box, the node sleeps most of the day. It wakes five times to read and send, and the sun refills the battery in between.

Wakes, reads, sends · five times a daySolar charging

Controller and radio

Wakes five times a day, reads every sensor, sends, and sleeps.

Battery

Plenty of reserve for cloudy weeks. Charging pauses below freezing to protect the cells.

Solar charging

Keeps the battery topped up, even on short winter days. Never needs plugging in.

In the field

Out in the rows, each node sits in the fruit zone and sends its readings by radio to the barn.

Project sensor enclosure mounted on a vineyard end post, with farm buildings behind the vinesNode, in the fruit zoneGateway, at the barn
Project installation. Illustrated radio connection from the sensor enclosure to the barn.

Reporting

Five readings a day

Mount

Trellis wire or ground pole

Network

Long-range radio, one gateway

Power

Solar, no outlet needed

Close view of a project enclosure at fruiting-wire height
The enclosure at fruiting-wire height, vines leafed out around it.
Project sensor enclosure among dense grapevine foliage
The enclosure within the canopy, as a grower sees it in the row.

Gateway

At the barn, one gateway collects every reading from every node and passes it to your phone over the barn's wifi.

Gateway board with USB-C power, external LoRa antenna and a black OLED screen displaying NODE 03 · LEAF: WET 3h 20m
Backhaul
Connects through the barn’s wifi
Power
Plugs into any standard outlet, always on
Housing
Waterproof casing, rated for outdoor use
Coverage
Whole property, nodes relay through each other
Screen
Shows its status at a glance
  1. Far node
  2. Nearby node passes it on
  3. Gateway at the barn
  4. Barn wifi
  5. Your phone

Specifications

Everything in one place, side by side.

SpecificationNodeOne per spot in the rowsGatewayOne per property, at the barn
What it doesReads conditions in the rowsCollects every reading
SensorsLeaf wetness, canopy temperature and humidity, soil moistureNone
RadioLong range LoRa, no license neededLong range LoRa, no license needed
InternetNot neededBarn wifi
PowerSolar, never plugged inStandard outlet, always on
BatteryTwo rechargeable cells, 10,000 mAh, protected below freezingNot needed
HousingSealed, gasketed boxWaterproof case
MountingTrellis wire or ground poleInside the barn or on a wall
ReadingsFive a dayEvery reading from every node
SetupNo tools, no configurationPlug in and join the wifi
Monthly feesNoneNone

Let's install the nodes

Apply for a pilot